ADVANCE TSG- Test RM - Physical Memory
Joined: 22 Dec 2009
Topic: ADVANCE TSG- Test RM - Physical Memory
Posted: 11 Oct 2010 at 10:18am
Disclaimer: All guides provided are generalized information for personal troubleshooting. None of which are certified by the respective part manufacturers. Any improper installation/removal, mishandling, or negligence on your part, will be counted as physical damage and therefore void your warranty. If you have at anytime concerns or wariness please contact our technician support.
All pictures provided may differ to your own system configurations and components.
Physical Memory Test
Determine first whether you have a triple channel or Dual channel setup
The memory would normally be located to the right hand side of the motherboard. (Indicated in the diagrams)
To REMOVE a RAM stick: (picture A)
Press the side clips down. The RAM will be unlocked and can be pulled directly out.
To INSTALL a RAM Stick: (picture B)
Align the notch on the RAM stick to the slot. They will only go in 1 way. Once in place the clip needs to be closed down to hold the RAM in place.
1. Check if the system will run stable with a single RAM stick or not.
2. Simply remove all the RAM sticks; test 1 RAM in a single slot at a time and then repeat with other sticks in same slot.
3. If no errors are present it may point to a motherboard slot issue. You can try testing the slots by switching a RAM stick in the slots.
***Note: Some motherboard will not start unless certain slots are used. Review over your motherboard user manual for the details. ***
Edited by CyberHD - 02 Nov 2010 at 1:08pm
|Forum Jump||Forum Permissions
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum