Order online or Call: (800)707-0393
  Active TopicsActive Topics  Display List of Forum MembersMemberlist  CalendarCalendar  Search The ForumSearch  HelpHelp
  RegisterRegister  LoginLogin
Build & Compability Questions
 CyberPower Forum : Hardware : Build & Compability Questions
Message Icon Topic: Azza Solano case/cooler compatibility Post Reply Post New Topic
Author Message
johnejet
Newbie
Newbie


Joined: 31 Oct 2009
Online Status: Offline
Posts: 6
Quote johnejet Replybullet Topic: Azza Solano case/cooler compatibility
    Posted: 20 Nov 2009 at 9:38pm
Confused Has anyone found a cooler that allows the use of the large side panel fan on the inside as the case is designed. Clearance seems to be a big problem with any coolers offered by Cyberpower.  Thanks for any advice you may have in this regard.
IP IP Logged
festivus
Groupie
Groupie


Joined: 24 Oct 2009
Online Status: Offline
Posts: 44
Quote festivus Replybullet Posted: 20 Nov 2009 at 10:04pm
According to an article I read the solano has 150mm of clearence... so not much to choose from. The only one that is OC certified is the Big Typhoon VX (103mm in height)

You could always go with the OEM heatsink and slap on a Scythe which makes some decent low profile coolers if you're comfortable with doing such a task.

I know some have mounted the side fan externally, so that could be another option too.

Sorry bud, but if you're wanting the fan there isn't many options.



Edited by festivus - 20 Nov 2009 at 10:44pm
IP IP Logged
voldo89
Senior Member
Senior Member
Avatar

Joined: 30 Sep 2009
Location: United States
Online Status: Offline
Posts: 1173
Quote voldo89 Replybullet Posted: 20 Nov 2009 at 11:50pm
click on my signature..show how i modified it..and it will fit..very easy
Get the best help here, www.overclock.net If you have any issue with your gaming rig.
IP IP Logged
johnejet
Newbie
Newbie


Joined: 31 Oct 2009
Online Status: Offline
Posts: 6
Quote johnejet Replybullet Posted: 22 Nov 2009 at 9:09am
SmileThanks for the info - The specs I found say the Big Typhoon is 122mm to top of fan cage and 150mm total to top of the fan speed switch. Looks like the Max Orb will allow room for the side fan since it is only 95mm high. Also I think it sits high enough to install memory under it at 55mm which I will need to do on the Gigabyte MA790FXT MB.
IP IP Logged
Post Reply Post New Topic
Printable version Printable version

Forum Jump
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum